Post Reply 
FRAM71B... LAST CALL
12-05-2016, 07:18 PM
Post: #61
RE: FRAM71B... LAST CALL
(12-05-2016 06:19 PM)Hans Brueggemann Wrote:  only 20 were ordered and delivered (out of 30 pre-orders) by end of november. however, only two days later, most of the remaining modules were gone. orders for the last modules are now processed as they come, without further prioritizing.
interesting: many users, having pre-ordered a -512, opted for the -1024 later on.

Hans,

I've sent several emails to the address listed in the original post but have not received a reply. I'll send another order request now just to be sure.

Thanks!

Mark Hardman

Ceci n'est pas une signature.
Find all posts by this user
Quote this message in a reply
01-05-2017, 02:39 PM
Post: #62
RE: FRAM71B... LAST CALL
Thanks’ for all the efforts made to make the 71b an even greater machine.
I'm interested in a 512k, are there some left? Eventually, will there be some separate 512k ext. available in the future?
Will mail. Thanks, André.
Find all posts by this user
Quote this message in a reply
01-05-2017, 07:28 PM
Post: #63
RE: FRAM71B... LAST CALL
(01-05-2017 02:39 PM)dayd Wrote:  Thanks’ for all the efforts made to make the 71b an even greater machine.
I'm interested in a 512k, are there some left? Eventually, will there be some separate 512k ext. available in the future?
Will mail. Thanks, André.

Hi André,

Per Post #1 you'll need to send Hans an email. He won't respond to PM's.

Regarding the separate 512k extension, it currently exists as all FRAM71B-1024k modules are comprised of a 512k base module plus the 512k extension.

Good Luck, Dave
Find all posts by this user
Quote this message in a reply
01-10-2017, 05:14 AM
Post: #64
RE: FRAM71B... LAST CALL
Thanks’ Dave,
That’s what I did; one 512 is coming… Smile
From what I understand there is not ‘512k Extender only’ available at the moment, but maybe Q3/2017, if people are interested.
Find all posts by this user
Quote this message in a reply
01-10-2017, 04:14 PM
Post: #65
RE: FRAM71B... LAST CALL
(01-10-2017 05:14 AM)dayd Wrote:  Thanks’ Dave,
That’s what I did; one 512 is coming… Smile
From what I understand there is not ‘512k Extender only’ available at the moment, but maybe Q3/2017, if people are interested.

Hi André,

Very good! I'm kind of surprised that there're some left.

Hans did announce that he'd be selling the leftover PCB's later this year so you could assemble one yourself. I have to say that the 1024k option is one of the coolest features.

Dave
Find all posts by this user
Quote this message in a reply
07-09-2017, 07:04 PM
Post: #66
RE: FRAM71B... LAST CALL
(01-02-2016 08:07 AM)Hans Brueggemann Wrote:  f. In july 2017, all plain unpopulated p.c. boards that were left over from production can be purchased by those who want to roll their own FRAM71B.

I have a FRAM chip left over, so I'm looking forward to the PCB/kit.
Find all posts by this user
Quote this message in a reply
07-10-2017, 08:59 AM
Post: #67
RE: FRAM71B... LAST CALL
(01-02-2016 08:07 AM)Hans Brueggemann Wrote:  f. In july 2017, all plain unpopulated p.c. boards that were left over from production can be purchased by those who want to roll their own FRAM71B.

I am also interested in one board, please put my name on the list.

Bernhard

That's one small step for a man - one giant leap for mankind.
Find all posts by this user
Quote this message in a reply
07-10-2017, 09:16 AM
Post: #68
RE: FRAM71B... LAST CALL
sorry guys,
all unpopulated FRAM71B main boards are already gone.
some unpopulated -512 extender boards are still available, though.
Find all posts by this user
Quote this message in a reply
07-10-2017, 03:20 PM
Post: #69
RE: FRAM71B... LAST CALL
I may be interested in an extender board. Is it possible to get it assembled? I don't trust my soldering skills with SMD components, specially something as tightly populated as a FRAM board.
Find all posts by this user
Quote this message in a reply
07-10-2017, 04:52 PM
Post: #70
RE: FRAM71B... LAST CALL
no, can't offer pre-assembly for these boards.
Find all posts by this user
Quote this message in a reply
07-11-2017, 03:33 AM (This post was last modified: 07-11-2017 03:34 AM by dingebre.)
Post: #71
RE: FRAM71B... LAST CALL
I was fortunate enough to get a FRAM71 PCB, and while waiting for it to arrive, I wanted to start collecting parts. I have looked thorough this thread and the "Pre-Production" thread, done a search on the site, but haven't seen a parts list/BOM for the PCB. I grabbed all the documentation I could find, the firmware, etc.

What am I missing? I found the bezel on ShapeWay and the module holder. Is there a source for the connector pins or do I have to cannibalize an old card reader? I suspect the other components are fairly easy to source. I also got a FlashPro5 on order.

Of course, a huge thank you for everyone is involved in this, especially Hans!

David

David Ingebretsen
Collision Forensics & Engineering, Inc.
dingebre@CFandE.com
http://www.CFandE.com
http://Analoguerealities.com
Find all posts by this user
Quote this message in a reply
07-11-2017, 03:40 AM (This post was last modified: 07-11-2017 03:52 AM by Dave Frederickson.)
Post: #72
RE: FRAM71B... LAST CALL
(07-11-2017 03:33 AM)dingebre Wrote:  I was fortunate enough to get a FRAM71 PCB, and while waiting for it to arrive, I wanted to start collecting parts. I have looked thorough this thread and the "Pre-Production" thread, done a search on the site, but haven't seen a parts list/BOM for the PCB. I grabbed all the documentation I could find, the firmware, etc.

What am I missing? I found the bezel on ShapeWay and the module holder. Is there a source for the connector pins or do I have to cannibalize an old card reader? I suspect the other components are fairly easy to source. I also got a FlashPro5 on order.

Of course, a huge thank you for everyone is involved in this, especially Hans!

David

Hans said he'll email a BOM in a few days. Be aware that the firmware you grabbed isn't for the FRAM71B. Hans will need to release that as well.
Find all posts by this user
Quote this message in a reply
07-11-2017, 03:58 AM (This post was last modified: 07-11-2017 03:58 AM by dingebre.)
Post: #73
RE: FRAM71B... LAST CALL
(07-11-2017 03:40 AM)Dave Frederickson Wrote:  
(07-11-2017 03:33 AM)dingebre Wrote:  I was fortunate enough to get a FRAM71 PCB, and while waiting for it to arrive, I wanted to start collecting parts. I have looked thorough this thread and the "Pre-Production" thread, done a search on the site, but haven't seen a parts list/BOM for the PCB. I grabbed all the documentation I could find, the firmware, etc.

What am I missing? I found the bezel on ShapeWay and the module holder. Is there a source for the connector pins or do I have to cannibalize an old card reader? I suspect the other components are fairly easy to source. I also got a FlashPro5 on order.

Of course, a huge thank you for everyone is involved in this, especially Hans!

David

Hans said he'll email a BOM in a few days. Be aware that the firmware you grabbed isn't for the FRAM71B. Hans will need to release that as well.

Thank you Dave. Thanks for the heads up about the firmware.

David

David Ingebretsen
Collision Forensics & Engineering, Inc.
dingebre@CFandE.com
http://www.CFandE.com
http://Analoguerealities.com
Find all posts by this user
Quote this message in a reply
07-11-2017, 05:25 AM
Post: #74
RE: FRAM71B... LAST CALL
thanks for bringing this up.
yes, will send BOM (all parts are either from mouser or digikey), a magnified layout print for locating the components, and the FRAM71B firmware.
Find all posts by this user
Quote this message in a reply
07-11-2017, 06:47 AM
Post: #75
RE: FRAM71B... LAST CALL
(07-11-2017 05:25 AM)Hans Brueggemann Wrote:  thanks for bringing this up.
yes, will send BOM (all parts are either from mouser or digikey), a magnified layout print for locating the components, and the FRAM71B firmware.

Thank you Hans.

David

David Ingebretsen
Collision Forensics & Engineering, Inc.
dingebre@CFandE.com
http://www.CFandE.com
http://Analoguerealities.com
Find all posts by this user
Quote this message in a reply
07-15-2017, 11:41 PM
Post: #76
RE: FRAM71B... LAST CALL
(07-10-2017 03:20 PM)jwhsu Wrote:  I may be interested in an extender board. Is it possible to get it assembled? I don't trust my soldering skills with SMD components, specially something as tightly populated as a FRAM board.

There're only 7 parts on the Extender. How many folks would be interested in an assembled board?
Find all posts by this user
Quote this message in a reply
07-17-2017, 12:35 PM
Post: #77
RE: FRAM71B... LAST CALL
(07-15-2017 11:41 PM)Dave Frederickson Wrote:  
(07-10-2017 03:20 PM)jwhsu Wrote:  I may be interested in an extender board. Is it possible to get it assembled? I don't trust my soldering skills with SMD components, specially something as tightly populated as a FRAM board.

There're only 7 parts on the Extender. How many folks would be interested in an assembled board?

I would be interested.
Find all posts by this user
Quote this message in a reply
09-20-2017, 02:53 PM
Post: #78
RE: FRAM71B... LAST CALL
So do I !!!
Really interrested in a FRAM71B module !
Find all posts by this user
Quote this message in a reply
09-20-2017, 03:31 PM
Post: #79
RE: FRAM71B... LAST CALL
(09-20-2017 02:53 PM)caloubugs Wrote:  So do I !!!
Really interrested in a FRAM71B module !

My inquiry was with respect to the 512k Extender and I believe that all of the boards are gone. Your best bet for a FRAM71 is through the Classifieds here.

Dave
Find all posts by this user
Quote this message in a reply
11-20-2018, 01:14 AM
Post: #80
RE: FRAM71B... LAST CALL
I would be interested in acquiring a FRAM71 or FRAM71B if they were available.

Or would you recommend some other hardware?

I know this thread has been dead for a long time.

thegoldbug
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)