Post Reply 
3d complex function output surface for fixed real or imag input and 3d scatter plot
01-04-2020, 05:24 AM (This post was last modified: 02-20-2020 05:29 PM by FrankP.)
Post: #1
3d complex function output surface for fixed real or imag input and 3d scatter plot
To allow viewing a colored output surface in one graph, the x or y input is fixed to one value:
  • Real x input fixed:
    z used for the IMAGINARY OPTPUT
    ^
    | / y is the changing imaginary input
    |/
    0-----> x fixed => reused for REAL OUTPUT
  • Imaginary y input fixed:
    z used for the REAL OPTPUT
    ^
    | / y fixed => used for IMAGINARY OUTPUT
    |/
    0-----> x is the changing real input

By displaying also values above and below the fixed input value a 3d band will give an idea of the colored complex output surface.
Additionally values setup in L1 in the form {x,y,z} can be displayed with a numbered cross in the 3d space.
  • Input dialogs used for configuration.
  • Touch gestures and keys to rotate, move and zoom.
  • Useable gestures / keys displayed in lower part of graph.
   
.zip  Compl3d_101.zip (Size: 45.6 KB / Downloads: 1)
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)