Poll: Would you like to 1) source your own boards and components, 2) order a PCB and source your own components, or c) order a kit
Source PCB and componets yourself
Order PCB and source components yourself
Order a kit
[Show Results]
Note: This is a public poll, other users will be able to see what you voted for.
Post Reply 
WP34S USB and IR board release
03-31-2017, 03:18 PM (This post was last modified: 11-05-2018 03:31 PM by Harald.)
Post: #1
WP34S USB and IR board release
Hi everyone!

This has taken longer than intended, but finally, as already promised to a couple of people, here comes the data to make your own PCBs.

[Image: 2h4x55h.jpg]

Those who don't know what this is about, please click here

Since I originally made this board (simply because I wanted it myself) and then offered it to others on the forum, a lot has changed in my life. I got married and now am father of two young children. Time really flies...
Anyhow, what I am trying to say here is, I simply don't find the time to solder and test these boards anymore. I thought that everyone who wanted one, would already have one by now, but clearly that is not the case. I still get an email asking for a board every now and then. So I decide to publish the data for it.

Now we have a couple of options:

a) You can either get your PCBs manufactured from the attached eagle data and order the parts from mouser

or, depending on how much interest there is I could:

b) offer the remaining boards I have at €5.00 including world wide shipping
c) offer a kit containing all the components and the PCB at €12.50 including shipping

Note that a couple of component values have changed and the schematic isn't up to date. Here is the BOM:

Code:

IC1        FTDI FT230XS-R 
R1, R2     27 Ohm
R3, R4     3k3
R5         390 Ohm
C1, C2     47p
C3, C4     100n
T1         PMV160
D1         BAT54A
X1         Hirose ZX62-B-5PA

IR LED     TSAL4400
Crystal    AB26T-32.768KHZ
Caps       18p

Please choose a, b or c.

Cheers,
Harald

EDIT: I have also attached the eagle PCB data for the flash cable replacement board. This board converts the original HP flash cable from RS232 to USB.


Attached File(s)
.pdf  basic_ir.brd.pdf (Size: 26.67 KB / Downloads: 199)
.pdf  basic_ir.sch.pdf (Size: 11.3 KB / Downloads: 179)
.zip  basic_ir.zip (Size: 35.83 KB / Downloads: 97)
.zip  flash_cable.zip (Size: 35.15 KB / Downloads: 67)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
WP34S USB and IR board release - Harald - 03-31-2017 03:18 PM
RE: WP34S USB and IR board release - c785 - 04-03-2017, 11:18 AM
RE: WP34S USB and IR board release - c785 - 04-03-2017, 02:13 PM
RE: WP34S USB and IR board release - c785 - 04-06-2017, 06:23 AM
RE: WP34S USB and IR board release - nsg - 04-06-2017, 12:58 AM
RE: WP34S USB and IR board release - Gene - 04-08-2017, 08:21 PM
RE: WP34S USB and IR board release - jch - 04-09-2017, 06:14 PM
RE: WP34S USB and IR board release - c785 - 04-10-2017, 06:14 PM
RE: WP34S USB and IR board release - c785 - 04-10-2017, 09:13 PM
RE: WP34S USB and IR board release - TomC - 06-24-2017, 12:12 AM
RE: WP34S USB and IR board release - TomC - 09-22-2017, 01:55 AM
RE: WP34S USB and IR board release - c785 - 07-05-2017, 07:25 PM
RE: WP34S USB and IR board release - 2far - 09-05-2018, 08:57 AM
RE: WP34S USB and IR board release - TomC - 01-28-2020, 12:19 AM
RE: WP34S USB and IR board release - TomC - 01-28-2020, 11:12 PM
RE: WP34S USB and IR board release - JanS - 12-12-2022, 12:32 PM



User(s) browsing this thread: 2 Guest(s)