03-31-2017, 03:18 PM
Hi everyone!
This has taken longer than intended, but finally, as already promised to a couple of people, here comes the data to make your own PCBs.
Those who don't know what this is about, please click here
Since I originally made this board (simply because I wanted it myself) and then offered it to others on the forum, a lot has changed in my life. I got married and now am father of two young children. Time really flies...
Anyhow, what I am trying to say here is, I simply don't find the time to solder and test these boards anymore. I thought that everyone who wanted one, would already have one by now, but clearly that is not the case. I still get an email asking for a board every now and then. So I decide to publish the data for it.
Now we have a couple of options:
a) You can either get your PCBs manufactured from the attached eagle data and order the parts from mouser
or, depending on how much interest there is I could:
b) offer the remaining boards I have at €5.00 including world wide shipping
c) offer a kit containing all the components and the PCB at €12.50 including shipping
Note that a couple of component values have changed and the schematic isn't up to date. Here is the BOM:
Please choose a, b or c.
Cheers,
Harald
EDIT: I have also attached the eagle PCB data for the flash cable replacement board. This board converts the original HP flash cable from RS232 to USB.
This has taken longer than intended, but finally, as already promised to a couple of people, here comes the data to make your own PCBs.
Those who don't know what this is about, please click here
Since I originally made this board (simply because I wanted it myself) and then offered it to others on the forum, a lot has changed in my life. I got married and now am father of two young children. Time really flies...
Anyhow, what I am trying to say here is, I simply don't find the time to solder and test these boards anymore. I thought that everyone who wanted one, would already have one by now, but clearly that is not the case. I still get an email asking for a board every now and then. So I decide to publish the data for it.
Now we have a couple of options:
a) You can either get your PCBs manufactured from the attached eagle data and order the parts from mouser
or, depending on how much interest there is I could:
b) offer the remaining boards I have at €5.00 including world wide shipping
c) offer a kit containing all the components and the PCB at €12.50 including shipping
Note that a couple of component values have changed and the schematic isn't up to date. Here is the BOM:
Code:
IC1 FTDI FT230XS-R
R1, R2 27 Ohm
R3, R4 3k3
R5 390 Ohm
C1, C2 47p
C3, C4 100n
T1 PMV160
D1 BAT54A
X1 Hirose ZX62-B-5PA
IR LED TSAL4400
Crystal AB26T-32.768KHZ
Caps 18p
Please choose a, b or c.
Cheers,
Harald
EDIT: I have also attached the eagle PCB data for the flash cable replacement board. This board converts the original HP flash cable from RS232 to USB.