HP-41 - port not working
|
10-09-2016, 08:54 AM
Post: #9
|
|||
|
|||
RE: HP-41 - port not working
Dear aurelio,
Diego asked me to send him some fotos of the I/O block and he found a corroded spot on it. Using a DMM I could confirm the missing thru-contact. I repaired it using a very small metal piece (from soldering tabs) that I tin-plated and soldered with much caution onto the corroded part of the I/O block to build a bridge across the corroded spot. Good luck! Andi |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
HP-41 - port not working - AndiGer - 07-29-2016, 05:11 PM
RE: HP-41 - port not working - wojtek - 08-03-2016, 02:32 PM
RE: HP-41 - port not working - Diego Diaz - 08-04-2016, 01:03 AM
RE: HP-41 - port not working - AndiGer - 08-13-2016, 12:01 PM
RE: HP-41 - port not working - Diego Diaz - 08-19-2016, 04:20 AM
RE: HP-41 - port not working - AndiGer - 08-28-2016, 12:11 PM
RE: HP-41 - port not working - AndiGer - 09-05-2016, 08:44 AM
RE: HP-41 - port not working - aurelio - 10-09-2016, 06:48 AM
RE: HP-41 - port not working - AndiGer - 10-09-2016 08:54 AM
|
User(s) browsing this thread: 1 Guest(s)