[41CL WARP] XEQ+ oddness

[cdmackay]

So far, I've only tried the new modules on my DM41X

First, I replicated my normal config where I use the p6/p7 versions of OSX & WARP, but using the LIB4 & WARP-P7 mod files from the above zip, and the other modules from the SM 20210218 set. that gave me:

4 LIB4 R58+ 12.02.2021
6 OSX p6 R51 06.01.2021
7 WARP p7 6.3 16.02.2021
8 PWRX P9 18.09.2019
A/B SM44 8.8 12.10.2020

with the above, XEQ+ Q produces QREM, pg A.


I then repeated the above, but using the floating versions of OSX & WARP, which gave:

4 LIB4 R58+ 12.02.2021
8 OSX R51 06.01.2021
A WARP 6.3 16.02.2021
C PWRX P9 18.09.2019
E/F SM44 8.8 12.10.2020

with the above, XEQ+ Q produces QREM, pg E.


In neither case does XEQ+ find Q<> from the WARP module.


Finally, I tried loading solely the LIB4 & (floating) WARP modules from the above zip. With that, XEQ+ Q says No Match.

I take it that the above is unexpected?

It does, however find P<> from WARP, which appears to be adjacent in the FAT?


I'll try the 41CL tomorrow.