04-05-2021, 08:41 PM
I've been belatedly enjoying the wonders of the XEQ+ function on my 41CL, from Ángel's excellent WARP module.
I'm using this on both my DM41X and 41CL, and seeing oddness only on the latter.
For example… I have XEQ+ assigned to the XEQ key, so press that, and get the XEQ+ prompt.
I press the − key, for 'Q', to find the function QREM, from the SM44 module.
On the DM41X, this works fine: QREM.
On the 41CL, after I press 'Q', I get:
I know I'm hitting 'Q', because if I hold it, the display shows 'Q'. So what is that above?
I try RCL, to see the XROM detail, but RCL has now been mapped to: M<>, so I get:
Clearly I've done something wrong here, but I'm not sure what.
Might it be my module order? On the 41CL I have:
8 OSX3
9 YFNX
A PWRX
B WARP
C SM44 (and D)
I checked Cat 6, but I have nothing assigned, other than the PWRX & SM44 launchers, to 11 and -11, and XEQ+ to 32 (on both devices).
I have the same modules loaded in my DM41X (bar YFNX), albeit in different pages, and order:
6 OSX3
7 WARP
8 PWRX
A SM44 (and B)
Any ideas, please?
I'm using this on both my DM41X and 41CL, and seeing oddness only on the latter.
For example… I have XEQ+ assigned to the XEQ key, so press that, and get the XEQ+ prompt.
I press the − key, for 'Q', to find the function QREM, from the SM44 module.
On the DM41X, this works fine: QREM.
On the 41CL, after I press 'Q', I get:
Code:
L'__
I know I'm hitting 'Q', because if I hold it, the display shows 'Q'. So what is that above?
I try RCL, to see the XROM detail, but RCL has now been mapped to: M<>, so I get:
Code:
M<>'__
Clearly I've done something wrong here, but I'm not sure what.
Might it be my module order? On the 41CL I have:
8 OSX3
9 YFNX
A PWRX
B WARP
C SM44 (and D)
I checked Cat 6, but I have nothing assigned, other than the PWRX & SM44 launchers, to 11 and -11, and XEQ+ to 32 (on both devices).
I have the same modules loaded in my DM41X (bar YFNX), albeit in different pages, and order:
6 OSX3
7 WARP
8 PWRX
A SM44 (and B)
Any ideas, please?