HP Forums / HP Calculators (and very old HP Computers) / General Forum v / Civil Engineers with Experience Using the Colebrook Equation?

Post Reply 
Civil Engineers with Experience Using the Colebrook Equation?
02-05-2021, 10:02 PM (This post was last modified: 02-05-2021 10:03 PM by MNH.)
Post: #1
MNH Offline
Member
 		Posts: 226
Joined: May 2014
Civil Engineers with Experience Using the Colebrook Equation?
Colebrook Equation
[attachment=9074]

I read that an iteration of the Colebrook Equation will test the values of 'f' that will result in the difference between the two sides to be zero or very close to zero. Also, generally three to four iterations are sufficient to converge on a reasonably good value of the friction factor. How was this conclusion reached? I've never worked with iterations before. Will a Do-While loop work well?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Civil Engineers with Experience Using the Colebrook Equation? - MNH - 02-05-2021 10:02 PM



User(s) browsing this thread: 2 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication