HP Forums / HP Calculators (and very old HP Computers) / General Forum v / Turning on a HP 41 with the HP IL module plugged

Post Reply 
Turning on a HP 41 with the HP IL module plugged
05-17-2020, 07:19 PM (This post was last modified: 05-17-2020 07:20 PM by Sylvain Cote.)
Post: #3
Sylvain Cote Offline
Senior Member
 		Posts: 2,099
Joined: Dec 2013
RE: Turning on a HP 41 with the HP IL module plugged
Normal delay when the loop is broken or when a device on the loop is powered off.
If you have no device connected, connect the two cable end together so the loop is closed.

Edit: Didier beat me to it. Smile
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Turning on a HP 41 with the HP IL module plugged - Sylvain Cote - 05-17-2020 07:19 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication