34s cable?
|
09-29-2017, 03:22 PM
(This post was last modified: 09-29-2017 03:26 PM by Dave Frederickson.)
Post: #6
|
|||
|
|||
RE: 34s cable?
(09-29-2017 12:08 PM)striegel Wrote: I did buy one of those but couldn't get it to work correctly with my desktop system running Windows 10 Professional. When I bought a different adapter from Eric Rechlin's site, it proved worth the money. The cable on Eric's site is USB to RS-232. This is definitely NOT the cable to use unless you have one of the HP RS-232 programming adapter cables. As Mark pointed out, a cable that brings out 3.3V power is desirable if you want to incorporate the RESET and PROGRAM switches like on Harald's board in Katie's article. http://www.hpmuseum.org/cgi-sys/cgiwrap/...ead=229916 Once you have the cable electronics figured out you can fashion a plug. http://www.hpmuseum.org/forum/thread-609.html I added a second connector housing to help prevent the pogo pins from getting bent. Good luck! |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
34s cable? - BarryT - 09-28-2017, 10:00 PM
RE: 34s cable? - mfleming - 09-29-2017, 02:18 AM
RE: 34s cable? - BarryT - 09-29-2017, 03:57 AM
RE: 34s cable? - striegel - 09-29-2017, 12:08 PM
RE: 34s cable? - Dave Frederickson - 09-29-2017 03:22 PM
RE: 34s cable? - mfleming - 09-29-2017, 03:08 PM
RE: 34s cable? - jch - 09-29-2017, 06:44 PM
RE: 34s cable? - Dave Frederickson - 09-29-2017, 06:58 PM
RE: 34s cable? - BarryT - 09-29-2017, 07:05 PM
RE: 34s cable? - ijabbott - 10-01-2017, 11:22 PM
|
User(s) browsing this thread: 1 Guest(s)