[Update - G1, Android] Public Beta Availiable - Win/Mac/Linux/Firmware/Android/iOS

[DrD]

Hardware G1/A Firmware 2019 10 16:
Changed Entry mode from Textbook to RPN
123 [Enter]
456 [Enter]
[+] <== Calculator rebooted, and had returned to Textbook mode on recovery.
Changed Entry mode from Textbook to RPN
123 [Enter]
456 [Enter]
[+] <== 579 (Worked ok during further testing)

Hardware G1/C Firmware 2019 10 16:
Same experience as G1/A, above.

Hardware G2 Firmware 2019 10 16:
No problem with RPN entry with this test.

My testing was done with a fresh firmware installation, on each machine. Only the G1 models had this issue. Although it was necessary to change the entry mode from Textbook to RPN again, the problem cleared after the crash recovery.

-Dale-