pyILPER 1.6.0 and LIFUTILS 1.7.7 final release

Threaded Mode | Linear Mode

pyILPER 1.6.0 and LIFUTILS 1.7.7 final release

02-05-2018, 11:16 PM

Post: #33

salvomic Offline

Senior Member

Posts: 1,396
Joined: Jan 2015

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release

(02-05-2018 11:11 PM)rprosperi Wrote: Sorry, Dave's right, I was not clear; JP3 is not used for setting baud rate...

Understood, thanks Smile

For now I'll keep JP2 off and JP3 off; if there will be issues I'll try JP3 on.
I checked JP2 off in Mac OS X and Windows 10 also: ok with 230kb in pyILper and ILCtrl. Also in Windows, now at 115KB pyILper returns "illegal retval".

salvo

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib

« Next Oldest | Next Newest »

Messages In This Thread

pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - jsi - 11-28-2017, 06:37 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - smp - 11-28-2017, 11:27 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 11-28-2017, 11:30 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - jsi - 11-29-2017, 07:22 AM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - jsi - 11-29-2017, 12:47 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - hth - 12-01-2017, 05:40 AM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 12-02-2017, 07:20 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - jsi - 12-02-2017, 08:11 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - Dave Frederickson - 12-02-2017, 08:16 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 12-02-2017, 08:37 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - Dave Frederickson - 12-02-2017, 08:41 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 12-02-2017, 09:20 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - Dave Frederickson - 12-02-2017, 11:03 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 12-02-2017, 11:19 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - jsi - 12-03-2017, 10:13 AM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - Dave Frederickson - 02-04-2018, 05:38 AM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - jsi - 02-04-2018, 12:11 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - Dave Frederickson - 02-04-2018, 05:15 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - jsi - 02-04-2018, 05:59 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - salvomic - 02-05-2018, 06:32 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - Dave Frederickson - 02-05-2018, 07:04 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - salvomic - 02-05-2018, 07:30 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 02-05-2018, 09:06 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - salvomic - 02-05-2018, 09:40 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 02-05-2018, 10:43 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - salvomic - 02-05-2018, 10:52 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - Dave Frederickson - 02-05-2018, 11:06 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - salvomic - 02-05-2018, 11:08 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - salvomic - 02-05-2018, 10:36 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 02-05-2018, 11:11 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - salvomic - 02-05-2018 11:16 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 02-06-2018, 12:42 AM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - salvomic - 02-06-2018, 08:14 AM

User(s) browsing this thread: 2 Guest(s)