pyILPER 1.6.0 and LIFUTILS 1.7.7 final release

Threaded Mode | Linear Mode

pyILPER 1.6.0 and LIFUTILS 1.7.7 final release

02-05-2018, 10:43 PM

Post: #28

rprosperi Offline

Super Moderator

Posts: 6,230
Joined: Dec 2013

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release

(02-05-2018 09:40 PM)salvomic Wrote: hi Bob,
I'm testing pyILPer now.
Today I set cables and started with PILbox and I saw the jumper set was the #2; should I test put in in #3?

Salvo

No, JP3 is not used.

JP2 - Jumper ON - 115KB
JP2 - Jumper OFF - 230KB

So just remove the jumper.

--Bob Prosperi

« Next Oldest | Next Newest »

Messages In This Thread

pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - jsi - 11-28-2017, 06:37 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - smp - 11-28-2017, 11:27 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 11-28-2017, 11:30 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - jsi - 11-29-2017, 07:22 AM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - jsi - 11-29-2017, 12:47 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - hth - 12-01-2017, 05:40 AM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 12-02-2017, 07:20 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - jsi - 12-02-2017, 08:11 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - Dave Frederickson - 12-02-2017, 08:16 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 12-02-2017, 08:37 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - Dave Frederickson - 12-02-2017, 08:41 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 12-02-2017, 09:20 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - Dave Frederickson - 12-02-2017, 11:03 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 12-02-2017, 11:19 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - jsi - 12-03-2017, 10:13 AM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - Dave Frederickson - 02-04-2018, 05:38 AM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - jsi - 02-04-2018, 12:11 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - Dave Frederickson - 02-04-2018, 05:15 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - jsi - 02-04-2018, 05:59 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - salvomic - 02-05-2018, 06:32 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - Dave Frederickson - 02-05-2018, 07:04 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - salvomic - 02-05-2018, 07:30 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 02-05-2018, 09:06 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - salvomic - 02-05-2018, 09:40 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 02-05-2018 10:43 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - salvomic - 02-05-2018, 10:52 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - Dave Frederickson - 02-05-2018, 11:06 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - salvomic - 02-05-2018, 11:08 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - salvomic - 02-05-2018, 10:36 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 02-05-2018, 11:11 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - salvomic - 02-05-2018, 11:16 PM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - rprosperi - 02-06-2018, 12:42 AM

RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release - salvomic - 02-06-2018, 08:14 AM

User(s) browsing this thread: 1 Guest(s)