HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP 15C and INT(1/√(1-x),0,1)

Post Reply 
HP 15C and INT(1/√(1-x),0,1)
01-10-2018, 03:20 PM
Post: #25
salvomic Offline
Senior Member
 		Posts: 1,396
Joined: Jan 2015
RE: HP 15C and INT(1/√(1-x),0,1)
(01-09-2018 06:59 PM)Dieter Wrote:  OK, but at which program line did this error occur and for which x-value (take a look at the other stack registers)?

Dieter

In "Limited edition" with accuracy 1E-6 the error 0 occurs after 47 minutes. The program ends in line "006 15", that's 1/x and the x is equal to 1, so the problem is the division by 0: 1/0.
That doesn't occur with 1E-5 (in 23 minutes) and 1E-4 (in 2'30'') nor 1E-3 or 1E-2, in witch the result is immediate or about immediate.
∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP 15C and INT(1/√(1-x),0,1) - salvomic - 11-26-2017, 07:51 PM
RE: HP 15C and INT(1/√(1-x),0,1) - JimP - 01-12-2018, 04:18 AM
RE: HP 15C and INT(1/√(1-x),0,1) - salvomic - 01-10-2018 03:20 PM
RE: HP 15C and INT(1/√(1-x),0,1) - tgray - 01-09-2018, 03:42 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication