Post Reply 
newRPL: Alpha demo 0.9 released [UPDATED 2017-10-25]
08-20-2017, 01:24 PM (This post was last modified: 08-20-2017 04:38 PM by Gilles59.)
Post: #41
RE: newRPL: Alpha demo 0.9 released [UPDATED 2017-08-11]
(08-19-2017 01:31 PM)Claudio L. Wrote:  
(08-19-2017 10:08 AM)Gilles59 Wrote:  Do we need a SD card of _exactly_ 2Gb to install newrpl ? I try with a old 128Mb SD card in FAT16 but i get a SD card error message.
By the way, i can access the files on the 50G using th FILES menu

I follow the instruction here :
https://newrpl.wiki.hpgcc3.org/doku.php?...stallation

I use an old 128 MB card too. The flashing is done by the bootloader, not by newRPL so there's no difference with a stock calculator. Any SD card should work in theory.
Make sure there's no issue with the file name you chose for the file, it has to be an 8.3 name as the bootloader doesn't work with long names.

It's curious but my 128Mo SD card is OK for my HP50G and 49g+ but the flashing is impossible. I reformat the card on the HP with ON-F4 menu but with this the card is formated in FAT32 and it seems that the bootloader needs FAT16. Dont work again for the flashing. I format the SD with my W10 PC in FAT (no FAT16 option in W10 but I guess that FAT is FAT16 ?), the SD is well recognise (Read/Write with the HP50) but unable to flash again! The card is not recognise with the bootloader.
I tried also to format in FAT16 with SDFormatter : same bad result with the bootloader. It's not a problem of NewRPL. I get the same failure with the HP Official ROM. I never used a SD Card in the past to upgrade HP50/49 ROM but the USB connexion. I dont undertand what happen. I will try later with another small SD Card.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: newRPL: Alpha demo 0.9 released [UPDATED 2017-08-11] - Gilles59 - 08-20-2017 01:24 PM



User(s) browsing this thread: 1 Guest(s)