Post Reply 
HP-82183A... Problem with ASTEC 0950-0408 :(
06-26-2017, 10:22 PM
Post: #8
RE: HP-82183A... Problem with ASTEC 0950-0408 :(
(06-26-2017 09:25 PM)Titi Wrote:  Ok. My battery 82033A give 5V. I test with another charger, Eurocharger 82066B.
This HP-82183A was with a 82059D so.

Now, in the motherboard, I get 18v & 5v ! But, LED Power is off ?

It looks like you can troubleshoot the printer with either a battery or AC adapter, but the Power LED is the first priority.

Refer to the service manual for Turn-On Troubleshooting Procedures. You can find the service manual either on the MoHPC flash drive or it can be downloaded from the HP41 website.

Mark mentioned mechanical failures. It doesn't hurt to clean the slide switches and lubricate them with a dielectric grease.

Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: HP-82183A... Problem with ASTEC 0950-0408 :( - Dave Frederickson - 06-26-2017 10:22 PM

User(s) browsing this thread: 1 Guest(s)