HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP 9810 A transformer

Post Reply 
HP 9810 A transformer
08-04-2016, 05:36 PM
Post: #10
calc_you_later Offline
Junior Member
 		Posts: 5
Joined: Aug 2016
RE: HP 9810 A transformer
So I replaced the fuse and disconnected the secondary from everything and it still blew the fuse... When it happened smoke seemed to come from the two wires in the top left of the photo but I didn't think that could happen. I don't really know what this means but I'll poke around further.

I cut the wires to the fan to take this assembly out and interestingly the two wires test for continuity, but it looks like an AC fan so maybe this is correct?

[Image: K58iPbf.jpg]
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP 9810 A transformer - calc_you_later - 08-04-2016, 12:04 PM
RE: HP 9810 A transformer - wojtek - 08-04-2016, 01:16 PM
RE: HP 9810 A transformer - calc_you_later - 08-04-2016, 01:31 PM
RE: HP 9810 A transformer - wojtek - 08-04-2016, 02:12 PM
RE: HP 9810 A transformer - teenix - 08-04-2016, 02:35 PM
RE: HP 9810 A transformer - teenix - 08-04-2016, 02:37 PM
RE: HP 9810 A transformer - Accutron - 08-04-2016, 03:21 PM
RE: HP 9810 A transformer - BartDB - 08-04-2016, 03:22 PM
RE: HP 9810 A transformer - calc_you_later - 08-04-2016, 03:26 PM
RE: HP 9810 A transformer - calc_you_later - 08-04-2016 05:36 PM
RE: HP 9810 A transformer - teenix - 08-04-2016, 10:06 PM
RE: HP 9810 A transformer - calc_you_later - 08-18-2016, 02:15 PM
RE: HP 9810 A transformer - Accutron - 08-18-2016, 02:41 PM
RE: HP 9810 A transformer - Dave Shaffer - 08-18-2016, 03:28 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication