pyILPER Version 1.3.3 released

[Dave Frederickson]

(04-22-2016 01:42 PM)rprosperi Wrote:  However keyboard in the remote terminal is not working, while it was OK on 1.3.3.

After numerous attempts I was able to get the terminal to work at 230K. The display is not as fast as the Printer device and the keyboard response is slow, but it works.

Verified that performance is a little slower than ILPer 2.2, but still around 1300 bytes/sec compared to 1440 for ILPer 2.2.

Dave