Post Reply 
newRPL: [UPDATED April 27-2017] Firmware for testing available for download
11-18-2016, 05:03 AM
Post: #487
RE: newRPL: [UPDATED November-08-16] Firmware for testing available for download
(11-18-2016 03:22 AM)Han Wrote:  
(11-17-2016 06:22 PM)Francois Lanciault Wrote:  I think it would be useful, especially for the menus where the user need numerous different commands at different levels, like the "PRG" menu. Going back at root level every time is time consuming.

Francois

I am probably not remembering this correctly, but I think that the intended final design was to have one of the two menus play the role of submenus. That is, once PRG appears in one of the two menus, then pressing a shift key + PRG would load the submenu into the "other" menu. I don't know if it has been decided upon yet (how to quickly load a submenu onto the "other" menu row), but maybe Claudio has some comments on this.

You have a good memory! Yes, the framework is in place, however in this first version of the main menu it was only done for Vars as a test (try it!). When using shift-hold+Vars in the main menu it will open it in the other one. This should be done for all menus in the main menu eventually.
It's done using RPL commands, so the user can create custom menus that operate in this way.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: newRPL: [UPDATED November-08-16] Firmware for testing available for download - Claudio L. - 11-18-2016 05:03 AM



User(s) browsing this thread: 4 Guest(s)