Post Reply 
newRPL: [UPDATED April 27-2017] Firmware for testing available for download
07-24-2016, 01:11 PM
Post: #334
RE: newRPL: [UPDATED July-14-16] Firmware for testing available for download
(07-24-2016 06:39 AM)JDW Wrote:  1. Is newRPL intended for the 50g hardware alone or any HP calc running ARM (including the Prime)?

From newRPL Home Page
Quote:The project aims to create a new RPL calculator environment to run in real calculator hardware.
Initially, the target will be the HP50g hardware, consisting on the following:
ARM 920T processor running at up to 200 MHz / 512 KBytes of RAM / 2 MBytes of NOR flash memory. / 16-grays screen, 131x80 pixels
If you read the thread, you will see that newRPL is also tested on the 49G+ by some users.
To my knowledge, Prime is not supported by Claudio.

(07-24-2016 06:39 AM)JDW Wrote:  2. Is the 50g screen capable of displaying grays?

(07-24-2016 03:11 AM)Claudio L. Wrote:  The second thing you'll notice is that the screen uses the 16-greys mode rather than plain black and white, ...

(07-24-2016 06:39 AM)JDW Wrote:  3. When newRPL is flashed to a 50g, newRPL completely replaces the stock OS such that the entire UI, commands, etc. are generated by newRPL? Is that how it works? In other words, newRPL is basically an OS replacement for the 50g (and Prime)?
Yes, yes and yes.

Sylvain
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: newRPL: [UPDATED July-14-16] Firmware for testing available for download - Sylvain Cote - 07-24-2016 01:11 PM



User(s) browsing this thread: 4 Guest(s)