Notes crashes the Prime

[Joe Horn]

(02-25-2015 02:04 AM)bobkrohn Wrote:  Do this? Correct?
It's from this Forum and not in User Manual.
Just double checking with you.

1. Press and hold down the 3 keys letters "C", "F" and "O".
2. While holding the CFO keys, use a paperclip into the RESET hole in the back of the Prime.
3. The diagnostic menu will show up and now you can release the CFO keys.
4. From the Menu, use key 4, then key 3, and then Enter. This will reset the calculator to factory defaults.
5. Wait for the next menu and press Esc key and at last the key 9.

All correct, although you can also do it without a paperclip by replacing just steps 1 and 2 above with the following: Turn off the calculator, press and hold down "C", "F", and "O", then press On. (Continue at step 3 above.)