Notes crashes the Prime

[bobkrohn]

(02-24-2015 10:54 PM)Han Wrote:  A total memory wipe consists of "formatting" the calculator (this does not affect the firmware at all). This basically puts the calculator back into the "from factory" state. I would not recommend a restore. Instead, I recommend an actual file transfer of only what it is you plan to test. Only then will you know if it's your program causing the issue. Otherwise, as Joe mentioned, your issues may have been the result of something completely unrelated to this program, and this program only makes those issues more readily recognizable (in the form of bad notes).

Do this? Correct?
It's from this Forum and not in User Manual.
Just double checking with you.


1. Press and hold down the 3 keys letters "C", "F" and "O".
2. While holding the CFO keys, use a paperclip into the RESET hole in the back of the Prime.
3. The diagnostic menu will show up and now you can release the CFO keys.
4. From the Menu, use key 4, then key 3, and then Enter. This will reset the calculator to factory defaults.
5. Wait for the next menu and press Esc key and at last the key 9.