HP 32SII success and woes
|
02-20-2015, 02:22 AM
Post: #43
|
|||
|
|||
RE: HP 32SII success and woes
(02-20-2015 01:50 AM)Sanjeev Visvanatha Wrote: OK, the capacitor seems bad based on some resistance checks I made with an analog ohm meter. I get a small constant resistance when the positive lead is on the right of the capacitor and an infinite resistance when the leads are reversed. It's not uncommon for chips to stop working at voltages near the limit of their design. I suggest you use all 3 cells in series but install a series silicon diode to drop the voltage by about .6 volts. That will net you about 3.9 volts and keep the low battery indicator from turning on and the cells tight in the battery compartment. The low battery indication is set to about 3.5 volts in the 32sii. -katie |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)