HP 32SII success and woes
|
02-19-2015, 02:13 AM
Post: #40
|
|||
|
|||
RE: HP 32SII success and woes
(02-16-2015 09:36 AM)jebem Wrote: Now, the real challenge here is to find out the correct value of it. There are no markings on the SMD resistor. It is a jumper as we have concluded before. The capacitor is marked 106 16k, the same as the HP 10B I have and the link quoted above. I only have access to an analog multimeter. With it set at 10x, the resistance of the jumper reads ~0.0 Ohms. The resistance across the capacitor reads about 16 Ohms. The resistance across the same spec capacitor on the HP 10B PCB I have is 17.5 Ohms. (02-16-2015 09:36 AM)jebem Wrote: Now, that is interesting information! I do not have access to a power supply. Can I test the capacitor further with a basic analog multimeter? -- Sanjeev Visvanatha |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)