Post Reply 
HP 32SII success and woes
02-11-2015, 11:50 PM (This post was last modified: 02-11-2015 11:50 PM by ElectroDuende.)
Post: #18
RE: HP 32SII success and woes
(02-11-2015 10:55 PM)rprosperi Wrote:  I just checked 2 32SII's, both from '98 - no plate, and a 32S from '90 and it does have the plate.

This small sampling seems to imply the early Pioneers did have the metal plate, while late model Pioneers did not have the metal plate.

As noted above, this is likely not related to the problem, but it does contribute one more useless little factoid about the differences within the Pioneer family.

Later in manufacturing or in design?

My units:

17BII - 1996 - has metal plate
20S - 1991 - doesn't have plate
21S - 1991 - doesn't have plate
22S - 1990 - has metal plate
27S - 1988 - has metal plate
32SII -1993 - doesn't have plate

In the begining I thought it was used only in the "high end" hardware (dot matrix, buzzer) but finding it in the 22S and not in the 32SII throws this...

So it is possible that, as you say, it was used in first units designed and removed later, but 20S and 21S are quite early models...
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP 32SII success and woes - renif - 02-10-2015, 01:56 PM
RE: HP 32SII success and woes - rprosperi - 02-11-2015, 02:12 PM
RE: HP 32SII success and woes - rprosperi - 02-11-2015, 10:55 PM
RE: HP 32SII success and woes - ElectroDuende - 02-11-2015 11:50 PM
RE: HP 32SII success and woes - rprosperi - 02-12-2015, 12:21 AM
RE: HP 32SII success and woes - rprosperi - 02-13-2015, 12:51 PM
RE: HP 32SII success and woes - rprosperi - 02-13-2015, 06:53 PM
RE: HP 32SII success and woes - rprosperi - 02-14-2015, 02:03 PM
RE: HP 32SII success and woes - jebem - 02-16-2015, 09:36 AM
RE: HP 32SII success and woes - jebem - 02-16-2015, 03:22 PM
RE: HP 32SII success and woes - jebem - 02-17-2015, 03:05 PM
RE: HP 32SII success and woes - jebem - 02-20-2015, 03:39 PM
RE: HP 32SII success and woes - rprosperi - 02-28-2015, 04:32 AM



User(s) browsing this thread: 1 Guest(s)