Post Reply 
WP34s Repurposing Journey PhotoJournal
01-29-2015, 05:55 PM (This post was last modified: 03-05-2015 06:40 AM by MarkHaysHarris777.)
Post: #14
RE: WP34s Repurposing Journey PhotoJournal
I have reworked my proto board (FlashBox v1.0), cleaned up the wiring, and have begun the work to add flops, control lights, monitor lights, and cushioned cradle. The flash-box is based on the following schematic (if you find an error, please let me know and I'll fix it). The flash cable is actually very simple. With the exception of the FTDI PL2303HX there really isn't any electronics involved (unless you just want to) --- just wiring and two switches (ok, two resistors).

[Image: schematic.jpg]

The following pics are the front, rear, and open views on the 'Flash Box Revisited'.

[Image: frontview.png]
[Image: rearview.png]
[Image: openview.png]

Last but certainly not least, credit where credit is due--- thank you Pauli and Walter, and all the rest of the team for bringing us repurposing and the WP34s! (the coolest community project on the net, bar none!)

[Image: pauliwalter.png]

Cheers gang,

Kind regards,
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: WP34s Repurposing Journey PhotoJournal - MarkHaysHarris777 - 01-29-2015 05:55 PM

User(s) browsing this thread: 1 Guest(s)