32SII LCD Part
|
01-09-2015, 08:39 AM
(This post was last modified: 01-09-2015 08:44 AM by kusmi.)
Post: #5
|
|||
|
|||
RE: 32SII LCD Part
(01-09-2015 01:10 AM)cadman777 Wrote: It just crapped-out on me today, and after taking it apart, the btm foam is disconnected from the lcd. If it is just the foam, the LCD still might be ok? The disconnected/disintegrated foam problem is very common for the 32SII - you could try to replace the foam. I did that with my 32SII a while back. You can find information at: http://www.finetune.co.jp/~lyuka/interes...c/hp32sII/ http://www.keesvandersanden.nl/calculato...repair.php So basically apply another sheet of foam (in my case just a small stripe of double-coated adhesive-strip) on top of the disintegrated foam, so the LCD-connector has contact with the main-board again. Ooops: Sorry I think I misread your post - you are talking about the LCD and not the keyboard foam... sorry... |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
32SII LCD Part - cadman777 - 01-09-2015, 01:10 AM
RE: 32SII LCD Part - rprosperi - 01-09-2015, 02:08 AM
RE: 32SII LCD Part - John Galt - 01-09-2015, 02:41 AM
RE: 32SII LCD Part - rprosperi - 01-09-2015, 03:51 AM
RE: 32SII LCD Part - kusmi - 01-09-2015 08:39 AM
RE: 32SII LCD Part - aj04062 - 01-09-2015, 11:46 AM
|
User(s) browsing this thread: 1 Guest(s)