Search
Member List
Calendar
Help
|
ROMCOPY
|
|
01-26-2024, 03:36 PM
(This post was last modified: 01-26-2024 06:20 PM by Dave Frederickson.)
Post: #15
|
|||
|
|||
RE: ROMCOPY
(01-25-2024 10:08 AM)Hiwi Wrote: For the HP71 the baudrate should be 230k, the jumper JP2 in the pil box should be set. Lets get some stuff straight. PILBOX version 1.0 with firmware v1.5 can run up to 115k. PILBOX version 2.0 with firmware v2.1 can run up to 230k. All this ASSIGNIO/LISTIO stuff is not required. The dump routine uses device Addresses, not Assign Codes. EDIT: There is currently on eBay, a RARE 64k RAM module at a reasonable price. https://www.ebay.com/itm/176196850754 This can provide two 32k ports for installing ROM images. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
RE: ROMCOPY - KeithB - 01-24-2024, 03:56 PM
RE: ROMCOPY - Hiwi - 01-24-2024, 03:57 PM
RE: ROMCOPY - hesc - 01-24-2024, 04:14 PM
RE: ROMCOPY - Sylvain Cote - 01-24-2024, 05:51 PM
RE: ROMCOPY - Dave Frederickson - 01-25-2024, 01:02 AM
RE: ROMCOPY - hesc - 01-25-2024, 07:44 AM
RE: ROMCOPY - Dave Frederickson - 01-26-2024, 03:04 PM
RE: ROMCOPY - Hiwi - 01-25-2024, 10:02 AM
RE: ROMCOPY - Hiwi - 01-25-2024, 10:08 AM
RE: ROMCOPY - Dave Frederickson - 01-26-2024 03:36 PM
RE: ROMCOPY - Sylvain Cote - 01-26-2024, 07:53 PM
RE: ROMCOPY - Dave Frederickson - 01-26-2024, 08:33 PM
RE: ROMCOPY - Sylvain Cote - 01-26-2024, 09:12 PM
RE: ROMCOPY - floppy - 01-27-2024, 04:44 PM
RE: ROMCOPY - hesc - 01-25-2024, 11:22 AM
RE: ROMCOPY - Hiwi - 01-25-2024, 01:48 PM
RE: ROMCOPY - KimH - 01-25-2024, 03:03 PM
RE: ROMCOPY - Hiwi - 01-25-2024, 01:51 PM
RE: ROMCOPY - hesc - 01-26-2024, 10:22 PM
RE: ROMCOPY - Dave Frederickson - 01-26-2024, 10:50 PM
|
User(s) browsing this thread: 1 Guest(s)