HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP 41CL - Power Consumption

Post Reply 
HP 41CL - Power Consumption
09-09-2021, 01:01 PM (This post was last modified: 09-09-2021 01:08 PM by Hans Brueggemann.)
Post: #14
Hans Brueggemann Offline
Member
 		Posts: 242
Joined: Dec 2013
RE: HP 41CL - Power Consumption
well, not an idea in terms of what a probable fault could be. but here you may find an idea about how to sense the supply current of your calculator:
Current sensing in battery compartments
it is just a stripe of Kapton foil "sandwiched" between two self-adhesive copper strips, so both strips are fully isolated from each other. the copper strips each have a super-flex wire soldered to them and are then "short-circuited" via a DMM set to mA mode.
(running out of data space here in the forum, and don't want to delete anything. hence the link to my post on eevblog.)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP 41CL - Power Consumption - AndiGer - 08-23-2021, 10:14 AM
RE: HP 41CL - Power Consumption - mfleming - 08-23-2021, 02:29 PM
RE: HP 41CL - Power Consumption - mfleming - 08-25-2021, 06:12 PM
RE: HP 41CL - Power Consumption - Hans Brueggemann - 09-09-2021 01:01 PM
RE: HP 41CL - Power Consumption - Neve - 09-09-2021, 07:05 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication