HP65 display issue
|
08-07-2021, 10:14 PM
Post: #6
|
|||
|
|||
RE: HP65 display issue
That can be seen in my "after" picture, the middle display is slightly brighter then the other two. In my case, the first module I changed apparently already was broken (as the 45 calculator was DOA I couldn't have known, but at my second attempt with another module I got it working. The brightness issue is seen in the picture but not really noticable for the naked eye.
I'm used to solder my own boards for hobby, and I had no problem desoldering the modules with a non-professional solder iron, and with a cheep de-soldering "gun", just being careful when doing it. It might be I was lucky, both with the soldering and with the modules. Anyhow, that was my short story on how I managed to get the 55 working again and I'm happy to share that story. Best regards, Thomas [35/45/55/65/67/97/80 21/25/29C 31E/32E/33E|C/34C/38E 41C|CV|CX 71B 10C/11C/12C/15C|CE/16C 32S|SII/42S 28C|S 48GX/49G/50G 35S 41X] |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
HP65 display issue - SteveO - 08-05-2021, 11:25 PM
RE: HP65 display issue - ThomasF - 08-06-2021, 05:23 AM
RE: HP65 display issue - SteveO - 08-07-2021, 10:04 AM
RE: HP65 display issue - ThomasF - 08-07-2021, 01:03 PM
RE: HP65 display issue - GreyUser - 08-07-2021, 02:45 PM
RE: HP65 display issue - ThomasF - 08-07-2021 10:14 PM
RE: HP65 display issue - teenix - 08-07-2021, 11:09 PM
RE: HP65 display issue - ThomasF - 08-08-2021, 06:34 AM
RE: HP65 display issue - GreyUser - 08-08-2021, 05:03 PM
RE: HP65 display issue - teenix - 08-09-2021, 01:20 AM
RE: HP65 display issue - aurelio - 08-12-2021, 07:23 PM
RE: HP65 display issue - GreyUser - 08-09-2021, 02:07 AM
RE: HP65 display issue - teenix - 08-09-2021, 03:06 AM
RE: HP65 display issue - [kby] - 08-20-2021, 06:43 AM
|
User(s) browsing this thread: 2 Guest(s)