HP Forums / HP Calculators (and very old HP Computers) / General Forum v / Finally an HP-41CV owner

Post Reply 
Finally an HP-41CV owner
07-28-2021, 04:19 PM (This post was last modified: 07-28-2021 04:21 PM by BillBee.)
Post: #12
BillBee Offline
Member
 		Posts: 207
Joined: Feb 2020
RE: Finally an HP-41CV owner
If you are on the road and can find a hardware store you might be able to just source a couple of screws. IIRC #2 machine head 3/8" - should get you in the ballpark.

The longer screws go through the broken posts and sink into the screw holes in the base.

Save Travels!
Bill
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Finally an HP-41CV owner - Xorand - 07-27-2021, 04:58 AM
RE: Finally an HP-41CV owner - BillBee - 07-27-2021, 10:44 AM
RE: Finally an HP-41CV owner - Xorand - 07-27-2021, 04:13 PM
RE: Finally an HP-41CV owner - dmh - 07-28-2021, 12:16 AM
RE: Finally an HP-41CV owner - JurgenRo - 07-27-2021, 06:12 PM
RE: Finally an HP-41CV owner - Xorand - 07-28-2021, 07:32 AM
RE: Finally an HP-41CV owner - rprosperi - 07-28-2021, 12:19 PM
RE: Finally an HP-41CV owner - Xorand - 07-28-2021, 03:45 PM
RE: Finally an HP-41CV owner - BillBee - 07-28-2021 04:19 PM
RE: Finally an HP-41CV owner - Xorand - 07-28-2021, 09:09 PM
RE: Finally an HP-41CV owner - dmh - 07-28-2021, 11:29 PM
RE: Finally an HP-41CV owner - Xorand - 07-29-2021, 01:11 AM
RE: Finally an HP-41CV owner - BillBee - 07-29-2021, 11:03 AM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication