HP Forums / HP Calculators (and very old HP Computers) / General Forum v / 75D First Steps.

Post Reply 
75D First Steps.
04-22-2021, 11:08 PM (This post was last modified: 04-22-2021 11:09 PM by Dave Frederickson.)
Post: #16
Dave Frederickson Offline
Senior Member
 		Posts: 2,188
Joined: Dec 2013
RE: 75D First Steps.
(04-22-2021 08:53 PM)dhe Wrote:  The way the att pod fits, it only shows two rom ports, I was thinking att probably had proprietary software in one of the other slots?

Any mine reports:
MEM - 22423
VER$ - bbbbbb

I'm also assuming to upgrade I just need to copy the correct file onto a USB thumb drive and boot from it? =)

The Pod connects to the 75 via the right-most front port. See the Pod manual.
http://www.hpmuseum.net/document.php?hwfile=6200

The firmware could be upgraded with a FRAM75, like FRAM71 can do with the 71B, as soon as someone makes one.

Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
75D First Steps. - dhe - 04-15-2021, 09:33 PM
RE: 75D First Steps. - dhe - 04-15-2021, 09:35 PM
RE: 75D First Steps. - Dave Frederickson - 04-15-2021, 09:52 PM
RE: 75D First Steps. - dhe - 04-15-2021, 10:57 PM
RE: 75D First Steps. - Dave Frederickson - 04-15-2021, 11:58 PM
RE: 75D First Steps. - Sylvain Cote - 04-16-2021, 02:18 AM
RE: 75D First Steps. - rprosperi - 04-16-2021, 02:29 AM
RE: 75D First Steps. - dhe - 04-16-2021, 12:23 PM
RE: 75D First Steps. - dhe - 04-21-2021, 07:25 PM
RE: 75D First Steps. - rprosperi - 04-21-2021, 09:06 PM
RE: 75D First Steps. - Sylvain Cote - 04-21-2021, 09:42 PM
RE: 75D First Steps. - rprosperi - 04-22-2021, 12:46 AM
RE: 75D First Steps. - dhe - 04-22-2021, 08:53 PM
RE: 75D First Steps. - Dave Frederickson - 04-22-2021 11:08 PM
RE: 75D First Steps. - dhe - 04-23-2021, 12:01 AM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication