Post Reply 
HP-30b - dead key - repair
06-18-2014, 12:30 PM
Post: #7
RE: HP-30b - dead key - repair
Pito,
If the key is moving too freely, I would suspect the pin ( about 1mm diam.) under the key that presses against the dome is damaged. Now I also wish that I had taken some pictures. If I do another one, I will get some photos and post them for the group.

Best Regards,
Shawn
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP-30b - dead key - repair - pito - 06-17-2014, 07:21 PM
RE: HP-30b - dead key - repair - pito - 06-17-2014, 07:41 PM
RE: HP-30b - dead key - repair - walter b - 06-17-2014, 08:05 PM
RE: HP-30b - dead key - repair - jebem - 06-18-2014, 05:30 AM
RE: HP-30b - dead key - repair - pito - 06-18-2014, 10:42 AM
RE: HP-30b - dead key - repair - Jeff O. - 06-18-2014, 12:49 PM
RE: HP-30b - dead key - repair - pito - 06-18-2014, 06:18 PM
RE: HP-30b - dead key - repair - Jeff O. - 06-19-2014, 02:42 PM
RE: HP-30b - dead key - repair - pito - 06-19-2014, 04:27 PM
RE: HP-30b - dead key - repair - Shawn Gibson - 06-18-2014 12:30 PM
RE: HP-30b - dead key - repair - Jeff O. - 06-19-2014, 02:35 PM
RE: HP-30b - dead key - repair - pito - 06-19-2014, 04:39 PM
RE: HP-30b - dead key - repair - pito - 06-20-2014, 04:53 PM
RE: HP-30b - dead key - repair - jebem - 06-20-2014, 06:03 PM
RE: HP-30b - dead key - repair - pito - 06-20-2014, 06:33 PM



User(s) browsing this thread: 1 Guest(s)