HP Forums / HP Calculators (and very old HP Computers) / General Forum v / Adjusting R8 to Increase HP-97 Printer Intensity

Post Reply 
Adjusting R8 to Increase HP-97 Printer Intensity
02-17-2021, 06:46 AM
Post: #9
James Linder Offline
Junior Member
 		Posts: 36
Joined: Jul 2020
RE: Adjusting R8 to Increase HP-97 Printer Intensity
I ordered the PCB mount potentiometers. I see they have 3 connectors.
Is the third connector just for a ground wire? I assume if yes, is this 3rd
connector the middle prong? Do I Just connect the middle prong to the black
wire going to the battery? Are the other 2 connectors bidirectional (does not matter
Which one is connected to R8 and which end is connected to the PCB connector?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Adjusting R8 to Increase HP-97 Printer Intensity - James Linder - 02-17-2021 06:46 AM
Potentiometers - Dave Frederickson - 02-17-2021, 06:11 PM
RE: HP97,91,92 Print Intensity - teenix - 02-15-2021, 10:41 PM
RE: HP97,91,92 Print Intensity - isanchez - 02-16-2021, 11:28 AM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication