HP Forums / HP Calculators (and very old HP Computers) / HP Prime v / Simple programming help with the Prime

Post Reply 
Simple programming help with the Prime
06-09-2014, 10:04 PM (This post was last modified: 06-09-2014 10:22 PM by John R. Graham.)
Post: #13
John R. Graham Offline
Member
 		Posts: 76
Joined: Dec 2013
RE: Simple programming help with the Prime
(06-09-2014 09:46 PM)Didier Lachieze Wrote:  It seems there has been some changes with the latest firmware update because now in RPN mode you don't need anymore to specify the number of arguments when calling a User program, with your program example:
Code:
2 ENTER 3 ADD() ENTER
returns 5.
Didier, thank you. That's good to know (and a distinct improvement, in my opinion).

- John
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Simple programming help with the Prime - John R. Graham - 06-09-2014 10:04 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication