Post Reply 
Advanced Graphing "Go To"
06-09-2014, 02:12 PM
Post: #2
RE: Advanced Graphing "Go To"
Hello,

Remember that the adv grapher can graph stuff not normally possible on any other graphing calculator. As part of this, you can position the cursor in any X or Y location as regions/edges etc are all valid. Where the confusion is probably coming in is that the cursor will automatically reposition itself onto the curve (or edge, or region) *closest* to the location entered since by default TRACE is turned on. So for example, if you are graphing Y=SIN(X) (radians) and type 5 for X and 10 for Y, you actually will end up around 7.5X and .96 Y.

If you are graphing a plain function, they normal function app is probably a better choice as it is tuned for that purpose. In there, just begin typing a number and you get a single box for a single X location. That is more exactly what you seem to be looking for.

TW

Although I work for the HP calculator group, the views and opinions I post here are my own.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Advanced Graphing "Go To" - swisscow - 06-09-2014, 12:28 PM
RE: Advanced Graphing "Go To" - Tim Wessman - 06-09-2014 02:12 PM
RE: Advanced Graphing "Go To" - swisscow - 06-09-2014, 02:26 PM
RE: Advanced Graphing "Go To" - CR Haeger - 06-09-2014, 02:21 PM
RE: Advanced Graphing "Go To" - swisscow - 06-09-2014, 03:16 PM



User(s) browsing this thread: 1 Guest(s)