Restore to hardware calculator broken?

[rprosperi]

(03-24-2020 08:40 PM)Orome Wrote:  

rprosperi Wrote:  Try fully resetting the target machine before the restore, it may make a difference.

Also, any possibility the backup file was damaged?

I've tried multiple different backups and none work.

How should I reset? Poking the reset hole doesn't fix the problem.

Also: CK crashes when I back up to my hardware prime.

From here: https://www.hpmuseum.org/forum/thread-818.html

"0.19) How to reset the Prime to recover from some unwanted issues (All Firmware releases including 7820), by Tim Wessman
Warning: these procedures will wipe the user's work.
Make sure you have a backup (Use the Connectivity Kit for that).
a) First approach - Wipe out all memory:
Press ON-APPS-ESC (all 3 together) and release.
b) Second approach - Reset to factory defaults:
Reboot the Prime and hold the three keys with the orange C F O letters. This will get you into the factory test menu, and you can format the drive. Once you see the "EA656 DIAGNOSTIC" Screen Menu, press 4 for FLS Utility, 3 for Format Disk C, then ENTER. Once finished, press ESC to back out into the main menu and press 9 to reset and reboot.
http://www.hpmuseum.org/forum/thread-397...l#pid36148"

While trying to not sound like I'm saying RTFM, I'd say you should at least skim this section to see the breadth and depth of articles already posted, there is a lot of content there that should help a lot of these kinds of questions.