HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP-65 - 1605A02841 - Weird display behavior

Post Reply 
HP-65 - 1605A02841 - Weird display behavior
02-12-2020, 12:11 AM (This post was last modified: 02-12-2020 12:12 AM by teenix.)
Post: #10
teenix Offline
Senior Member
 		Posts: 2,040
Joined: May 2016
RE: HP-65 - 1605A02841 - Weird display behavior
Hi Alberto,

If you put three 8's on the display then press [ENTER], you should see your last display change to the following image.

The trace on the left is for 0.00 showing, the one on the right should be similar for 8.88 showing.

If there is no change then the G segment data is not being sent out from the ARC in the hybrid module.

cheers

Tony


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP-65 - 1605A02841 - Weird display behavior - teenix - 02-12-2020 12:11 AM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication