Post Reply 
Public Beta Availiable - RC - Win/Mac/Firmware/Android/iOS
03-27-2020, 08:10 PM (This post was last modified: 03-28-2020 09:30 AM by ramon_ea1gth.)
Post: #53
RE: Public Beta Availiable - RC - Win/Mac/Firmware/Android/iOS
Dear Cyrille

It is a pleasure to have you here in the forum attending posts.

After some time playing with the emulators, I just received the real HP Prime. I connected it to my Linux computer and I can see it in a terminal with lsusb:
Code:
$ lsusb
Bus 001 Device 012: ID 03f0:2441 Hewlett-Packard

However, I was looking for an option in the Virtual Calculator menu to connect and I didn't see anything. Maybe I miss something... The 'About' dialog box says I am using Build: 2.1.14288 (2019 10 22)

I also tried to send a matrix from the Matrix menu in the real HP Prime. The 'Send' option is active and the calculator tries to send it to the computer. But, on the other side, the Virtual Calculator has no 'Send' option active in its Matrix menu.

Just in case, I checked the logs to find any problem during the connection of the HP Prime and they looked fine (the plug&play system trying to do something with the new device, but nothing serious I believe, no red warnings):

Code:
$ journalctl -f
mar 28 10:16:47 minicorvus kernel: usb 1-9: new high-speed USB device number 19 using xhci_hcd
mar 28 10:16:47 minicorvus kernel: usb 1-9: New USB device found, idVendor=03f0, idProduct=2441
mar 28 10:16:47 minicorvus kernel: usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
mar 28 10:16:47 minicorvus kernel: usb 1-9: Product: HP Prime
mar 28 10:16:47 minicorvus kernel: usb 1-9: Manufacturer: HP Prime
mar 28 10:16:47 minicorvus kernel: hid-generic 0003:03F0:2441.000D: hiddev1,hidraw5: USB HID v1.00 Device [HP Prime HP Prime] on usb-0000:00:14.0-9/input0
mar 28 10:16:47 minicorvus mtp-probe[9041]: checking bus 1, device 19: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9"
mar 28 10:16:47 minicorvus mtp-probe[9041]: bus: 1, device: 19 was not an MTP device
mar 28 10:16:48 minicorvus upowerd[1265]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:03F0:2441.000D
mar 28 10:16:48 minicorvus upowerd[1265]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0
mar 28 10:16:48 minicorvus upowerd[1265]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-9

Thank you for your dedication to this forum!

Ramón

PS. I enclose a picture to show the appearance of the Virtual Calculator in my Ubuntu 18.04 Linux:

[Image: linux_prime_calc.jpg]


(03-27-2020 06:36 AM)cyrille de brébisson Wrote:  Hello,

I have not looked at the code recently, but I think that we did, at one point, implement the USB function for Linux in the emulator...

This means that, if the code is still there and linked, you might be able to communicate between the linux emulator and a real calcualtor. This will allow you to send files from your calc to the linux PC through the emulator...

Give it a try and tell me if it works or not...

Cyrille
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Public Beta Availiable - RC - Win/Mac/Firmware/Android/iOS - ramon_ea1gth - 03-27-2020 08:10 PM



User(s) browsing this thread: 1 Guest(s)