Post Reply 
(SOLVED) 41CL - DOUBLE HEPAX ACCESS and MMU CONFIG
08-22-2019, 10:39 AM
Post: #38
RE: 41CL - DOUBLE HEPAX ACCESS
Hi, some little bit of specifications:
- I was sorry for respect of you and your work to help me.
- I am a scholar, to study (and learn) is in my nature.

I tried some experiments with MMU configuration exchange,
before to read your last message.
(The risk is very low, to reinstall 9CFA and 9CFB is a
matter of minutes).

With 9CFA active on MMU 0 to change to have 9SCI
STOCFG 1 // A backup
MMUDIS
MMUCLR

In 9SCI configuration, YFNX is in port 7
so

"YFNX" PLUGH
MMUEN
RCLCFG 6 (9SCI)

I verified with CAT 2 and all is OK.

To return to have 9CFA in port 0

MMUDIS
MMUCLR

In 9CFA, YFNX is in port 9
so

"YFNX" PLUG1U
MMUEN
RCLCFG 1 (9CFA)

Again I verified with CAT 2, and all is OK.

I think to begin to understand the mechanism of MMU.

At this point all the help I asked is at his end, but you
proposed me a procedure to save MMU configurations via HP-IL,
still I am not here to abuse of you to make my 41CL without any effort!!!
I ask you, if possible, to give me some suggestions so that I can try to
make it by myself. In case of problems, I can ask new help.

With all my gratitude, I thank you SO MUCH!!!!
With best regards.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: 41CL - DOUBLE HEPAX ACCESS - Podalirius - 08-22-2019 10:39 AM



User(s) browsing this thread: 2 Guest(s)