HP-87 and HP-9122D

[Dave Frederickson]

(07-21-2019 08:53 PM)stephenpeterson Wrote:  Thanks Dave.
My understanding is that if the drive is powered on before the computer, the first drive will be the default MSI. I have been using MSI ":D700" for drive 0 and ":D701" for drive 1.

Steve

Okay, but the way I interpret the command syntax is that you can only specify the directory size and interleave if the msus is specified. You might try INITIALIZE with no parameters or INITIALIZE ":D700" and see what happens. In any case an immediate error would indicate a syntax error.

Dave