Post Reply 
newRPL - build 1255 released! [updated to 1299]
09-15-2018, 01:18 AM
Post: #274
RE: newRPL - build 1089 released! [update:build 1105]
(09-14-2018 05:29 PM)The Shadow Wrote:  I'm embarrassed to say that I don't know how to make an image of an SD card. What's the process? Is there software you would recommend?

At least for Linux, there's plenty of results explaining how to use dd to copy a "raw" device such as an SD card. One slight wrinkle for x49gp I found is that I needed to dump the partition (i.e. /dev/sde1), not the whole raw card (/dev/sde). I've no idea why, and frankly it makes answering questions like this slightly more difficult.

Quote:This is an example for a 64Mb card:
viking@fatty ~$ dd if=/dev/sde1 of=sdcard bs=512
131072+0 records in
131072+0 records out
67108864 bytes (67 MB, 64 MiB) copied, 0.494781 seconds, 136 MB/s
viking@fatty ~$

Mac OS X probably has access to the dd command as well, but Windows doesn't have it natively. I haven't tried to copy a sd card to a file on Windows recently, so others might be able to chime in on that.

(Post 283)

Regards, BrickViking
HP-50g |Casio fx-9750G+ |Casio fx-9750GII (SH4a)
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: newRPL - build 1001 released! - pier4r - 12-16-2017, 08:03 AM
newRPL - on Hp 39gs - Martin Hepperle - 06-05-2019, 06:51 AM
RE: newRPL - build 1001 released! - pier4r - 12-23-2017, 10:16 AM
RE: newRPL - build 1001 released! - pier4r - 01-01-2018, 09:42 AM
t - Claudio L. - 01-01-2018, 03:06 PM
RE: newRPL - build 1001 released! - pier4r - 01-01-2018, 03:41 PM
RE: newRPL - build 1001 released! - pier4r - 01-02-2018, 04:54 PM
RE: newRPL - build 1001 released! - pier4r - 01-02-2018, 06:58 PM
RE: newRPL - build 1089 released! [update:build 1105] - brickviking - 09-15-2018 01:18 AM
newRPL - brickviking - 10-05-2018, 06:01 AM
How to participate? - erazor - 12-13-2019, 07:12 AM



User(s) browsing this thread: 1 Guest(s)