Weird behavior HP41c
|
10-02-2017, 02:04 PM
(This post was last modified: 10-02-2017 02:07 PM by Neve.)
Post: #6
|
|||
|
|||
RE: Weird behavior HP41c
Hi again,
Neither shorting the battery contacts nor the inverted batteries method induce a MEMORY LOSS on this machine. The only thing that does that is the on/clear sequence. Or, of course, removing the Quad Memory module. Now, I don’t know if this is gonna help since this behavior doesn’t happen all the time. It’s pretty sporadic and unexpected, and of course very annoying. PS-1: I used almost totally drained inverted batteries (0.300v each approx). PS-2:This machine doesn’t suffer from broken posts. The logic board is held in place by hex nuts that I have never removed. Engineer & Senior IT Executive 2x HP41CL, HP41CX, HP48GX, HP50g, 2x82162A Printer, 2x82143A Printer, 2x HP-IL, 2x Card-Readers, PIL-BOX. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Weird behavior HP41c - Neve - 10-02-2017, 05:54 AM
RE: Weird behavior HP41c - Geoff Quickfall - 10-02-2017, 06:15 AM
RE: Weird behavior HP41c - Neve - 10-02-2017, 06:22 AM
RE: Weird behavior HP41c - Geoff Quickfall - 10-02-2017, 06:55 AM
RE: Weird behavior HP41c - Neve - 10-02-2017, 07:42 AM
RE: Weird behavior HP41c - Neve - 10-03-2017, 06:29 AM
RE: Weird behavior HP41c - Neve - 10-02-2017 02:04 PM
RE: Weird behavior HP41c - Geoff Quickfall - 10-02-2017, 03:51 PM
RE: Weird behavior HP41c - Neve - 10-02-2017, 04:38 PM
RE: Weird behavior HP41c - Geoff Quickfall - 10-02-2017, 04:45 PM
RE: Weird behavior HP41c - Neve - 10-02-2017, 04:52 PM
|
User(s) browsing this thread: 1 Guest(s)