HP Forums / Not HP Calculators / Not quite HP Calculators - but related v / WP34S in less than 3 hours

Post Reply 
WP34S in less than 3 hours
04-17-2015, 01:13 PM (This post was last modified: 04-17-2015 04:58 PM by Michael Kathke.)
Post: #4
Michael Kathke Offline
Junior Member
 		Posts: 4
Joined: Apr 2014
RE: WP34S in less than 3 hours
Here is my solution for the custom programming adapter.
Now I need to 3D print a custom case for the programmer PCB from Harald Pott. Enjoy Wink

btw: Here is my old post with some other pictures: http://www.hpmuseum.org/cgi-sys/cgiwrap/...992#243992

[Image: hp30b2wp34s_3s.jpg]

[Image: hp30b2wp34s_4.jpg]

[Image: hp30b2wp34s_5.jpg]

[Image: hp30b2wp34s_6.jpg]

[Image: hp30b2wp34s_8c.jpg]

[Image: hp30b2wp34s_18.jpg]

[Image: hp30b2wp34s_19.jpg]

[Image: hp30b2wp34s_25s.jpg]

[Image: hp30b2wp34s_26.jpg]
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
WP34S in less than 3 hours - PANAMATIK - 11-02-2014, 09:46 AM
RE: WP34S in less than 3 hours - PANAMATIK - 11-02-2014, 07:52 PM
RE: WP34S in less than 3 hours - Michael Kathke - 04-17-2015 01:13 PM
RE: WP34S in less than 3 hours - walter b - 04-17-2015, 01:57 PM
RE: WP34S in less than 3 hours - PANAMATIK - 04-17-2015, 05:34 PM
RE: WP34S in less than 3 hours - emece67 - 04-23-2015, 12:21 PM
RE: WP34S in less than 3 hours - emece67 - 04-26-2015, 11:57 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication