HP 97 snapped key

[synthi]

(12-12-2023 01:58 PM)Hiwi Wrote:  Hi Antonio, that is a bit tricky.
I tried to glue it with CA, but it does not work very well.

no success for me, very very difficult
(check my other replies)

(12-12-2023 01:58 PM)Hiwi Wrote:  I then made a new connection rod from a piece of Carbon and drilled a 1mm hole into the keycap and one into the rod that is still in the calculator.
The best way is to dismantle the calc and glue it on a table.

dismantled completely, but no success...
(no rod, too difficult for me)

(12-12-2023 01:58 PM)Hiwi Wrote:  If you have no luck, i can send you a "new" E+ key from a donor HP97 free of any charge :-)
Ralf

I had no luck...