HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP48G Series Keyboard Hardware

Post Reply 
HP48G Series Keyboard Hardware
07-03-2023, 10:42 PM
Post: #2
Diego Diaz Offline
Member
 		Posts: 275
Joined: Dec 2013
RE: HP48G Series Keyboard Hardware
Hi Tom,

I haven't checked a 48 myself, but chances are that they use the same method that was implemented in the 42S.

This method is covered by US patent: 5065356.

In short, I'm afraid these resistances should be included in the replacement keyboard.

Hope this helps.

Best regards.

Diego.
"Do not suppose, check it twice."
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP48G Series Keyboard Hardware - TomC - 07-03-2023, 04:16 PM
RE: HP48G Series Keyboard Hardware - Diego Diaz - 07-03-2023 10:42 PM
RE: HP48G Series Keyboard Hardware - TomC - 07-04-2023, 10:27 AM
RE: HP48G Series Keyboard Hardware - TomC - 07-05-2023, 04:35 PM
RE: HP48G Series Keyboard Hardware - TomC - 07-08-2023, 11:57 AM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication