WP 34S: GTO.. behaviour

[Didier Lachieze]

(08-16-2014 07:49 AM)walter b Wrote:  

(08-15-2014 06:50 PM)Didier Lachieze Wrote:  What about GTO.000 going to step 000 if executed in program mode with default functions active for keys A, B, C & D and going to step 001 in run mode with XEQ A, B, C or D active on the keys A, B, C or D if local labels A, B, C or D are defined in the first program in RAM ?

I'm sorry that sentence is too complicated for my little brain. Please rephrase.

d:-?

Ok. Let see if I can do that without adding confusion ... ;-)

The point is that GTO.000 doesn't do the same thing if it is executed in program mode or in run mode:

1. in program mode, GTO.000 goes to step 000 as expected (the manual says that GTO.n goes to step n). With the program counter set at step 000 we are outside of any program and the keys A, B, C & D have their default function active.
2. in run mode, GTO.000 goes to step 001 (not step 000). As the program counter is set at the first step of the first program in RAM, any local label A, B, C or D in this program will activate the related XEQ A, B, C or D replacing the default function for the A, B, C or D keys.