[HP41] New storage drive on ARM (Raspberry PI2+PILBox+HP-IL+USB-Storage)

[floppy]

Update

- picture now with separate battery pack (ANKER in this case).
- HP41 or HP71B can be connected to it (HP41 on the picture).
- In case you want to see a screen (not just the result of the commands on the HP41 or HP71B screen), just connect an HDMI and you will see Video80

PI2 on eBay have currently reasonable prices.
More speed? use a PI3 or Pi4 (higher spec, higher price).

Remark: an HDMI screen was connected to the PI2 for helping making the final setup of the COM and TCP/IP numbers and screen positions in the ILPER ILVIDEO ILPILBOX applications. Perhaps all setup only via SSH can be done and will work from scratch, but this was not tried so far. It means, be ready to have an HDMI screen for the setup. Just in case.