HP Forums / HP Calculators (and very old HP Computers) / General Forum v / [HP41] New storage drive on ARM (Raspberry PI2+PILBox+HP-IL+USB-Storage)

Post Reply 
[HP41] New storage drive on ARM (Raspberry PI2+PILBox+HP-IL+USB-Storage)
01-01-2023, 02:08 PM
Post: #6
floppy Offline
Senior Member
 		Posts: 344
Joined: Apr 2021
RE: [HP41] New storage drive on ARM (Raspberry PI2+PILBox+HP-IL+USB-Storage)
Tester/debugger welcome in mainland EU; PM me if interested:
- (you have an HP41 or an HP71; you have a pilbox; you have an HP-IL interface)
- I send the PIL-Storage (base ARM Raspberry-PI2 in an housing; USB storage on it; a shutdown button on it)
- You use with HP41 and/or HP71
- You feedback
- I improve/adapt etc. (HP75?..) perhaps by sending/exchanging only SD cards
- You send back if no need/interest
HP71 4TH/ASM & Multimod, HP41CV/X & Nov64d, PILBOX, HP-IL 821.62A & 64A & 66A, Deb11 64b-PC & PI2 3 4 w/ ILPER, VIDEO80, V41 & EMU71, DM41X, HP75D
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [HP41] New storage drive on ARM (Raspberry PI2+PILBox+HP-IL+USB-Storage) - floppy - 01-01-2023 02:08 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication