HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP 39gs bricked? (pressing Reset + and - won't do anything)

Post Reply 
HP 39gs bricked? (pressing Reset + and - won't do anything)
05-27-2022, 10:28 PM (This post was last modified: 05-28-2022 11:45 AM by rprosperi.)
Post: #3
rprosperi Offline
Super Moderator
 		Posts: 6,233
Joined: Dec 2013
RE: HP 39gs bricked? (pressing Reset + and - won't do anything)
With all respect and no offense meant, etc. it's possible that the strange contortions one must use to hold down +/- and then press reset, etc. wasn't recognized. It's well worth trying this several more times, even with blank LCD, as it can sometimes take and proceed even after many misses.

Good luck!
--Bob Prosperi
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP 39gs bricked? (pressing Reset + and - won't do anything) - rprosperi - 05-27-2022 10:28 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication